Source: Bike Bound
Chattahoochee Skunkworks builds an “Outlaw CB400F”…
At the time of its introduction, the Honda CB400F was hailed as a mini-superbike. The small, highly sophisticated 408cc inline four boasted a 10,000 rpm redline and six-speed transmission — the first sixth gear on a Honda street bike. Few other machines pointed so closely to the exotic engineering and howling fury of Honda’s small-displacement, multi-cylinder GP bikes.
While two-stroke twins, triples, and large-capacity four-stroke fours were raw and plentiful, a whole segment of riders cared about charisma and cornering prowess as much as straight-line, muscle car-eating power:
“When Honda unveiled the café racer-inspired CB400F Super Sport in 1975, sport bike fans were either hypnotized or cheering in the streets. Nobody expected a Japanese manufacturer to hit the mark so squarely. The 400 had it all. Its tiny inline four had the mystique of Honda’s exotic road racing multis…” –Ultimate Motorcycling
In the storied hills of North Georgia lives a man some call “the 400F whisperer” — our friend Toby Jones of the Chattahoochee Skunkworks. While Toby does some stock restorations, he has more fun building mild customs, and the 400 Four is his hands down favorite — he’s done seven so far!
“In the vintage motorcycle world there is a thing called character, and the character of the CB400F suites me just fine. Although not the fastest bike in its class, it’s smooth, peppy, quite nimble in the curves and, when it hits the upper revs the sound that the little four makes is absolutely glorious!”
As with most of Toby’s 400F builds, this one started as a basket case — after all, these bikes are getting rarer by the day, and it wouldn’t make sense to start with a complete, resto-worthy donor. Highlights include a powder-coated frame and swingarm courtesy of Toby’s friend Monte Turner, a newly-laced set of shouldered alloy wheels with Avon rubber, rebuilt top end and carbs, repro tank and manifold from the 400F mavens at David Silver Spares, and a prototype seat built to spec by the good folks at Texavina, which uses the original hinges and seat lock.
Then there’s the lovely paint, harking back to the exotic Honda RC racers of yesteryear:
“I have a real soft spot for the traditional red/silver Honda racing colors, so the tank, seat cowl, side covers, and sectioned front fender got the House of Kolors Orion Silver treatment.”
While the bike was sold to a Florida collector before Toby got much seat time, he’s got enough parts lying around for another build — perhaps a vintage drag bike? We can’t wait to see that, Toby! Below, Toby gives us the full story of the build in his own words.
Outlaw 400F: In the Builder’s Words…
My name is Toby Jones and my little old shop, the “Chattahoochee Skunkworks,” is up in the foothills of North Georgia. In the past few years I’ve built more vintage bikes than I care to think about and I’m still pluggin’ along turning out a few bikes every year. Although I’ve done a few stock restorations, I have more fun building mild customs. The Honda CB400F is my hands down favorite to work with and, at last count, I’ve done seven of them.
In the vintage motorcycle world there is a thing called character, and the character of the CB400F suites me just fine. Although not the fastest bike in its class, it’s smooth, peppy, quite nimble in the curves and, when it hits the upper revs the sound that the little four makes is absolutely glorious!
The “Outlaw” CB400F project began, as most of mine do, with a basket case or two. These bikes are getting so thin on the ground that it just doesn’t make sense to start with a nice restorable one. A good deal of thought and planning went into the project.
The frame and swingarm was sent out to my friend Monte Turner for a slick coat of Viper powder coat. The top end of the motor was rebuilt as was a set of original carbs. The tank and exhaust header are new reproduction parts from David Silver Spares. The folks at Texavina were nice enough to supply a prototype seat to my specs. It uses the original hinges and seat lock and makes for a very tidy installation.
Dime City Cycle supplied sweet the Acewell tach/speedo unit and 4 into 1 supplied the switchgear, cables, reproduction wiring harness, and stainless brake hose kit.
As we always do on these bikes, we laced up a set of shouldered alloy wheels and wrapped them in Avon Roadrider tires. I have a real soft spot for the traditional red/silver Honda racing colors, so the tank, seat cowl, side covers, and sectioned front fender got the House of Kolors Orion Silver treatment.
Although I’ve done commissioned builds in the past, I’m at a point now where I design and build them as if I were keeping them for myself and this little bike was no exception. I had planned to show it at a few times and do some seat time on it when the weather got a little warmer up in the mountains, but when a collector from Florida dropped by the Skunkworks to pick up a little DT125 Yamaha that I had, he made me an offer I couldn’t refuse and ended up with both bikes. The good news is, I still have a few CB400F parts laying around and have been considering a vintage drag bike project. You never can tell?
Follow The Chattahoochee Skunkworks
More Chattahoochee Skunkworks Builds
Outlaw 400F: Honda CB400F Café Racer – Chattahoochee Skunkworks builds an “Outlaw CB400F”… At the time of its introduction, the Honda CB400F was hailed as a mini-superbike. The small, highly sophisticated 408cc inline four boasted a 10,000 rpm redline and six-speed transmission […] Senna Tribute: Honda CT70 John Player Special – The Chattahoochee Skunkworks pays tribute to a racing legend… Some of the most iconic racing liveries in history came out of the heyday of tobacco company sponsorship, when the likes of Lucky Strike, Marlboro, Rothmans, […] Super Sport: Honda CB400F by Chattahoochee Skunkworks – A 400 Four “TT” from the North Georgia hills! In 1975, Honda unveiled the CB400F, a middleweight four-cylinder four-stroke that stood out compared to the two-stroke twins and triples of its generation — machines such […] Chattachoochee Skunkworks: Honda CB400F Cafe Racer – Introduced in 1975, the Honda CB400F Super Sport is one of the most exquisite motorcycles ever to come out of Japan, a lightweight inline four with a 10,000 rpm redline, six-speed transmission, and quite possibly […] Best in Class: Honda CB400F by Chattahoochee Skunkworks – The Honda CB400F — aka the Honda 400 Four — was a lightweight inline four with 37 horsepower, a 6-speed gearbox (Honda’s first), svelte cafe racer styling, and one of the most beautiful factory exhausts […] Honda CB450 Restoration by Chattahoochee Skunkworks – The Sanitary White Honda CB450 Toby Jones and his wife recently moved from Florida to the foothills of North Georgia — one of the world’s motorcycling Valhallas. In honor of the famed nearby river, they […] Honda S90 Restoration by The Chattahoochee Skunkworks – 1965 Honda S90 resurrected in the Georgia foothills… Toby Jones and his wife — “the artists formerly known as OtC Custom Motorcycles” 😉 — recently moved from Vero Beach, Florida, to one of the world’s […
