Source: Bike Bound
[[{“value”:”Worth the Wait: CB750 from Black Cycles Australia…
For every lovely vintage bike you see cruising the backroads, parked up at the local tavern, or racing the track on Sunday, there are scores of abandoned projects just waiting for a new life. All too often a lack of time, money, or inspiration grinds a build to a halt, and the inertia just builds. Other times, the builder just has one too many projects, and the bike gathers dust in a corner of the shop as other builds (or paying work) take precedence. Often, the only solution is for the project to trade hands.
That was the case with this ’71 CB750K, which had some significant work done by an Australian builder before the project lost steam.
“The motor had been rebuilt, frame powder coated, and basically assembled as a roller, but it had been stored for 10 years after this work was completed and storage had taken a toll on all paint and surfaces!”
The original builder surrendered the bike to Wayne, a 70-year-old motorcycle enthusiast, who had the wisdom to seek out one of his nation’s best, Noel Muller of Black Cycles Australia, to complete the project. Though extenuating circumstances would make the build take a bit longer than expected, the result would be one very lovely CB750 café racer with some seriously rare and interesting details — check that MV Augusta-style 4:4 exhaust, for instance! Not to mention the custom-fabbed oil tank, Raask rearsets, custom swingarm, dual Dellortos with Lynx manifold, and Morad 5″ rear wheel.
Noel himself gave us a thorough rundown of the build, so we’re going to let him give you the story straight from the horse’s mouth. It’s been a little while since we featured one of Noel’s builds — a little over a year — so we’re doubly happy to have him back on BikeBound!
CB750K Café: In the Builder’s Words…
Early February this year I received a partly assembled 1971 Honda CB750K from Wayne, a new customer who had just purchased this bike and many aftermarket parts from his engineer friend who’d been accumulating some special parts with the intention of building a cool bike, but as happens so often, he had too many projects and this one was finally surrendered to Wayne, a 70-year-old bike enthusiast.
The motor had been rebuilt, frame powder coated, and basically assembled as a roller, but it had been stored for 10 years after this work was completed and storage had taken a toll on all paint and surfaces!
So I went ahead to chop the rear frame off (past the shock mounts) and remove nearly ALL the original frame brackets & tabs. I then fitted a new short tail hoop to accept a handmade steel cowl and a custom-made lower, shorter seat.
I then made the custom aluminium 2.5lt oil tank to fit.
I then stripped and painted the frame and (supplied) custom billet and steel boxed swingarm.
The motor needed a good detail before being refitted in the frame, including repainting the head in a black wrinkle finish, polish/repairing the covers, caps, and all stainless steel nuts ‘n bolts.
The dual Dellorto’s on a Lynx manifold had also degraded A LOT since first assembled, so Justin from PopBang Classics completely rebuilt them to better than new.
The exhaust is, I believe, custom headers leading to custom curved and tapered mufflers (4 into 4). It’s a little unclear the origin or actual builder, but possibly made in South Africa or Sweden? And believed to be one of only three sets ever made to resemble vintage MV Agusta pipes, but to directly bolt on to the SOHC CB. I’ve had the complete system jet coated in matte black by Competition Coatings.
You’ll also notice the vintage Raask rearsets specifically made to suit the Honda.
The front end is a 48mm Honda Hornet item that’s been rebuilt and lowered by XXX Rated Suspension.
Original front hub and Cognito Moto rear hub are laced into Morad 17″ aluminium rims…the rear was only around 4″ wide and Wayne specifically requested a wider rear, so I finally tracked down a new old stock Morad 5″ rim to match (as they’re discontinued now?).
We then fitted some new Michelin rubber — 120 front and a 170 wide rear — which then caused drive chain clearance issues! To solve this I ordered some YSS piggyback shocks (custom assembled by YSS) to have longer bases for more clearance. Then we went down to a 520 race chain and custom sprockets which did the trick and has ample clearance now.
There are also aftermarket billet triple trees, Brembo rear disc brake setup, Motogadget tiny speedo, buttons, bar-end indicators, Kellermann rear micro LED’s, aftermarket levers, and we built an aluminium front fender to suit with stainless steel mounts.
The headlight is a Purpose Built Moto billet 7″ item with custom aluminium fork tube mounts we made here.
The tank looked OK at first, but after careful inspection, we found surface rust under the paint and inside as well, so Justin from PopBang had the tank burnt out back to bare metal and painted the tank and tail to perfection.
He also completely wired the bike front to back using Dynatek electrical components. A lithium battery resides under the swingarm with a lithium regulator and the starter solenoid under there as well!
Because of the Raask rearsets, we can’t run the original kick-starter so it’s electric start only now. There are many more small details I haven’t mentioned as well!
Overall the build took a bit longer than we first thought, but Wayne is over the moon with the result and plans many miles on this one.
Follow the Builder
Black Cycles Australia: Black Cycles Australia | @blackcyclesaustralia
More Black Cycles Builds
Back from the Shed: Honda CB750K Café Racer – Worth the Wait: CB750 from Black Cycles Australia… For every lovely vintage bike you see cruising the backroads, parked up at the local tavern, or racing the track on Sunday, there are scores of abandoned […] Flying Triple: BMW K75 Custom – Three-cylinder Flying Brick from Black Cycles Australia… The BMW K75 was the 750cc triple-cylinder variant of the company’s K series “Flying Bricks” — nicknamed for the distinct layout of their inline engines. The company wanted […] Ride the Lightning: Suzuki DR-Z400 Street Tracker – Black Cycles Australia builds a 400cc street tracker… Introduced back in 2000, the Suzuki DR-Z400 remains still one of the most popular dual-sports on the market, boasting an especially strong aftermarket and rider community. While […] Speed Train: Harley-Davidson Dyna Café Racer – Big Twin Café Racer from Black Cycles Australia… The Harley-Davidson Dyna Super Glide (FXD) boasted a monster 1450cc Twin Cam 88 V-twin that cranked out 67 hp and a stump-pulling 86 lb-ft of torque at […] The Night Scrambler: Nightster 1200 Scrambler – The Scrambler We Wish Harley Had Built… Introduced back in 2007, the Sportster XL1200N Nightster was a blacked-out, lowered version of the regular Sportster — something of a “factory custom.” Though it was mainly an […] Dreamy Duc: 1971 Ducati 250 Café Racer – Black Cycles Australia builds a 250cc Ducati café racer… Starting in 1950s, brothers Joseph and Michael Berliner of the Berliner Motor Corporation were the US importers for Ducati and many other European marquees. As the […] Super Special Magazine: Issue 37! – We’re thrilled to have two articles in the new issue of Italy’s premier custom motorcycle magazine, Super Special. One is the 1950 Triumph Preunit from Noel Muller of Black Cycles Australia and Justin Holmes of […] Steampunk Virago: Yamaha XV1000 Rat Rod – Black Cycles Australia builds a “Steampunk Rat Bike”… The rat bike has a long and storied tradition in the motorcycle world. Rat bikes are generally hard-ridden, uncleaned machines with plenty of rust, patina, road grime, […] Italian for Blown: Turbo Ducati 916 “Soffiato” – Black Cycles Australia builds a Turbo Ducati! In 2001, the Ducati Monster S4 was the first of Bologna’s beloved Monsters to receive a liquid-cooled L-Twin heart transplant from the superbike side of the factory, and […] Honda CBR600F4i Street Tracker! – Black Cycles Australia builds a CBR street tracker… Historically, the 600cc sport bike class has remained one of the most competitive segments of the market, where race-replica supersports perform double duty as sharp-edged track weapons […] Australian Triumph: 1950 TR5 Bobber – Black Cycles x PopBang Classics build a Pre-unit Bobber… In the first half of the 20th century, the traditional way to build a motorcycle involved bolting together a separate engine and gearbox via a third […] Duconda 400: Honda-Ducati Cafe Racer! – A Japanese-Italian love story from Black Cycles Australia… Introduced in 1977, the Honda CB400T was the successor to the CB360. Better known as the Honda Hawk (US) or Dream (UK), the twin-cylinder CB400 offered a […] Two-Stroke Ripper: KTM 300 EXC Street Tracker – Black Cycles Australia builds one rip-ready KTM two-stroke… The KTM 300 EXC is the company’s flagship enduro machine, a 293cc two-stroke off-road weapon with a race-winning blend of weight, balance, handling, and power: “Lightweight, great […] Streamlined XT: 1980 Yamaha XT500 – Black Cycles Australia builds a streamlined XT for Retromotive… If you’ve been following BikeBound for any length of time, you know we’re big fans of the Yamaha XT500. Not only did the 500cc single win […”}]]
